HFO Drip Sampler
The most common and cheapest way to get a representative sample is to use a drip sampler.
Installation
The heavy oil sampler can be installed on any standard flange.
MARPOL 73/78
Designed to comply with regulatory requirements in sampling.
Using a so-called drip sampler is the most common and economic way to obtain a representative sample according to MARPOL 73/78 Annex VI.
One size sampler can be used on most common different standard flanges even for different pressure.
In cases when you have a negative pressure at the point of sampling please use our automatic samplers.
Select the nearest size Bunker Sampler with an outer diameter smaller than the flanges Pitch Circle Diameter minus the flanges Bolt Hole Diameter.
The inner diameter must be larger than the Nominal Pipe Size of the flange.
Product information
Related articles
Your Benefits
- Manufactured under strict ISO 9001 quality assurance standards.
- Compliant with IMO MARPOL 73/78 Annex VI helping you to stay within the legal requirements for bunker fuel sampling.
- Weight optimized
- Simple to install on all common flanges between 2” and 14”.
Ordering Information
Part Number Nominal Pipe Size
SAM-CT-10002 50 mm/2”
SAM-CT-10003 75 mm/3”
SAM-CT-10004 100 mm/4”
SAM-CT-10005 125 mm/5”
SAM-CT-10006 150 mm/6”
SAM-CT-10007 175 mm/7”
SAM-CT-10008 200 mm/8”
SAM-CT-10009 225 mm/9”
SAM-CT-10010 250 mm/10”
SAM-CT-10011 275 mm/11”
SAM-CT-10012 300 mm/12”
SAM-CT-10014 350 mm/14”