The CMT office will be closed on the 29th of March and 1st of April.

Vibration Meter Ex

Vibration Meter, Analyzer and Data Collector in Intrinsically Safe Version

 

All functions

Keine Einschnitte in die Funktionen des Vibration Meter mit der Ex-Version.

Safety

Die Ex-Version des Vibration Meters wurde entwickelt, um den Benutzer bei der Arbeit zu schützen.

Certificated

Das Vibration Meter Ex ist nach ATEX-Sicherheitsstandard zertifiziert.

The Vibration Meter is now also avaliable in an Ex version. All basic vibrodiagnostics measurements are available:

Overall Values RMS
velocity for a whole machinery body vibrations
Acceleration for bearing vibrations
Automatic speed detectoin

Overall Values Peak
velocity for a whole machinery body vibrations
Acceleration for bearing vibrations


FFT Spectrum
FFT analysis of vibration
3 max peaks detection

Time signal
Time waveform for a bearing shock observation
Demodulation - Envelope value

Frequency bands
3 frequency bans for highest acceleration signal detection

Displacement
Overall RMS and Peakmeasurement of vibration displacement

FASIT Expert system
Automatic Detection of
  • Unbalance
  • Loosenes
  • Misalignment
  • Bearing condition

You can listen to the signal with the headphones supplied with every unit. The Vibration Meter EX comunicates with the DDS software, which you can download for free from the website.

It is additionaly ATEX certified in the classes: 

  • [II] Non-mining
  • [2] Zone 1
  • [G] Gas atmosphere
  • [Ex ib] Principle of protection: Intrinsic Safety EN 60079-11
  • [IIC] Gas group - Acetylene, Hydrogen
  • [T4] Temperature class 135°C
  • [Gb] Equipment Protection Level – Zone 1 (high protection)
Image

Product information

4 MB for data:
120960 overall values
or 900 measurements of 800 line spectra
or 2048 sample time signals

Data storing:
Off-Route Route with DDS software (free download)

Interface:
USB 3.0, 2.0 compatible

Software:
Free version of DDS software (limited database size)

Display:
Colour graphic OLED display 128x128 pixels,
diagonal 1.5“ (38 mm)

 
Output:
1 x AC signal 8 Ω / 0,5 W for external headphones (signal listening)

Power:
2 x AA 1.5V batteries
(alkaline, NiMH, Lithium - 8 hours of operation)

Temperature:
Operating: -5°C to 55°C

Dimensions:
150 x 60 x 35 mm

Weight:
330 g including batteries (without cable, sensor and magnet)
540 g including batteries, cable, sensor and magnet
 

Ordering Information

 

VIB-CT-50031
CMT Vibration Meter Ex
With Memory and PC software (including one acceleration sensor)

VIB-CT-50017
PELTOR Heavy Duty Headphone
Signal: 8 Ohm / 0.5 W

VIB-CT-50075
Transport Case for VibrationMeter

That could be also interesting

Vibration Meter 

Vibration Meter Plus

DDS Software

Vibration Analyser

Image